2gb 4gb 8gb Spy Pen Using Guide

How to Use Mini Spy Pen Camera
Step 1:
Press the switch on the smart 4gb camera pen, it begins to kinescope as soon as being turned on. The blue light will turn on during kinescoping.
Step 2:
Press the switch again, it will begin to save data and then turn off, at this time, the light turns to yellow, reflect that the 4gb pen DVR is at sleeping status(that means do not kinescope or shut down neither).
Step 3:
If need to kinescope again, press the switch once more, then can come back to kinescope , during this time ,the light will turn to blue again.
Step 4:
Hold down the switch for 5s , then the power switch is off ,after shutting down the pen camera DVR , there is no guide light.
Step 5:
When finish charging the battery , the light stops glittering and the yellow light keeps on ,which means that battery is fully charged.
Step 7:
The 4gb spy pen camera will turn off itself when the battery has been used up. And will save the kinescoped files before automatically shutting down.


Spy Pen FAQ
Q : Can the video file which is recording be stored if the battery is out suddenly during using?
A : Don’t worry . if the battery use off suddenly this spy pen will store the recording video files before it turns off.

Q : How to deal with the situation of system halted?
A : Please use “RESET” button then push the on/off switch , so it will work again.

Q : Which form can be chosen to format?
A : Please use form “FAT” to format.

Q : What's the spy pen camera time set operation(How to setup the spy pen record time)?
A : Insert the disk accessory in you pc and run the time modify sofeware in it, or just ask our seller for sending the time set up software to you, then you can change the record time.